The California Water Boards' Annual Performance Report - Fiscal Year 2015-16
ENFORCE: NPDES STORM WATER |
|
MEASURE: VIOLATION TRENDS. TOTAL BY YEAR | ||||
|
|
MEASUREMENTS
Regional Offices |
2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | Regional Office Total |
---|
Click on a bar in the charts below, to show details for that region (third chart below).
FusionCharts will load here
|
|
WHAT THE MEASURE IS SHOWING
WHY THIS MEASURE IS IMPORTANT
TECHNICAL CONSIDERATIONS
- Data Source: CIWQS and SMARTS. Data extracted on October 5, 2016.
- Unit of Measure: Violations documented.
- Data Definitions: Violations with status "violation".
- References: Information on the Water Boards' NPDES Storm Water Program
Public Reports and Data
Office of Enforcement
The Water Boards' Enforcement Policy
GLOSSARY
- Construction Storm Water Program
- Dischargers whose projects disturb one or more acres of soil or whose projects disturb less than one acre but are part of a larger common plan of development that in total disturbs one or more acres, are required to obtain coverage under the General Permit for Discharges of Storm Water Associated with Construction Activity. Construction activity subject to this permit includes clearing, grading and disturbances to the ground such as stockpiling, or excavation, but does not include regular maintenance activities performed to restore the original line, grade, or capacity of the facility. For more information, see the Construction Storm Water Program.
- Industrial Storm Water Program
- The Industrial General Permit is an NPDES permit that regulates discharges associated with 10 broad categories of industrial activities. The Industrial General Permit requires the implementation of Best Available Technology Economically Achievable (BAT) and Best Conventional Pollutant Control Technology (BCT) to achieve performance standards. For more information, see the Industrial Storm Water Program.
- Municipal Storm Water Phase I Facilities
-
The Municipal Storm Water Permitting Program regulates storm water discharges from municipal separate storm sewer systems (MS4s). Storm water is runoff from rain or snow melt that runs off surfaces such as rooftops, paved streets, highways or parking lots and can carry with it pollutants such as: oil, pesticides, herbicides, sediment, trash, bacteria and metals. The runoff can then drain directly into a local stream, lake or bay. Often, the runoff drains into storm drains which eventually drain untreated into a local waterbody. For more information, see the Municipal Storm Water Program.