Disclaimer

General

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance or the method or equipment. Equipment should be installed and operated in accordance with all applicable laws and regulations.

This list of Leak Detection Evaluations was prepared by a work group consisting of State and EPA members and is limited to evaluations of leak detection equipment and procedures, or systems conducted by an independent third-party evaluator (see Appendix Glossary of Terms) and reviewed by the work group. This list includes evaluations conducted in accordance with either EPA Standard Test Procedures for Evaluating Leak Detection Methods (EPA/530/UST-90/004 through 010) or other test procedures accepted by the National Work Group on Leak Detection Evaluations (NWGLDE) as equivalent to the EPA standard test procedures (see Part III Acceptable Test Protocols).

The (NWGLDE) does not guarantee the performance of any leak detection method or equipment appearing on this List, nor does it warrant the results obtained through the use of such methods or equipment.

Specific

  • The NWGLDE does not evaluate methods or equipment and appearance on this List does not mean they are automatically acceptable for use in any particular state or local jurisdiction.
  • The NWGLDE List is not an EPA List, nor does appearance on this list constitute endorsement or approval by the NWGLDE or EPA. Anyone claiming that a device or method is “EPA approved” because it appears on this list is making a false claim.
  • The NWGLDE makes no representations concerning the safe operation of any method or equipment. All users of any method or equipment appearing on this List must assume full responsibility for the proper and safe operation of said equipment and assume any and all risks associated with its use.
  • On each data sheet, this List reports parameters and data values for methods, equipment, and software that are specific to the most current third-party evaluation submitted to the NWGLDE. Subsequent modifications or changes to the method, equipment, or software may produce parameters and data values that are significantly different than the listed third-party evaluation parameters and data values. It is the responsibility of the local implementing agency to accept or reject those modifications or changes.
  • Since long term material compatibility with the product stored is not addressed in test procedures and evaluations, the NWGLDE makes no representations as to the compatibility of leak detection equipment with the product stored.
  • Unless specifically indicated on the individual data sheets, performance with alternative fuels has not been demonstrated with the following exception:
    • Biodiesel B6 through B20 meeting ASTM D7467 and biodiesel B100 meeting ASTM D6751 may be used with all equipment listed for diesel whether or not these alternative fuels are included on individual data sheets. This exception DOES NOT APPLY to leak detection test methods using Out-of-Tank Product Detection (Vapor Phase) for B6-B20, and Out-of-Tank Product Detection (Liquid and Vapor Phase) and any tracer-based test methods for B100. For these methods, individual data sheets will have to be referenced to determine applicability.

Remanufactured Leak Detection Equipment Eligibillity

California compliant underground storage tank (UST) leak detection equipment must be evaluated by an independent third party testing laboratory. [California Code of Regulations, title 23, chapter 16, section 2643(f).] As mentioned previously in the disclaimer above, modifications or changes to the equipment may produce parameters and data values that are significantly different than the original parameters and data values. Remanufactured leak detection equipment is therefore not covered by the original equipment manufacturer’s evaluation and listing. In addition, performance certifications for leak detection equipment only can be obtained by the original equipment manufacturer. [California Code of Regulations (CCR), title 23, chapter 16, section 2643(f).]

Consequently, leak detection equipment that has been remanufactured, rebuilt, or refurbished by an entity other than the original equipment manufacturer is not acceptable for use in California. Moreover, selling remanufactured leak detection equipment for use in California is an unfair business practice. [Business and Professions Code, section 17203.] The State Water Resources Control Board (State Water Board) has advised remanufacturers that by June 8, 2015 all remanufactured leak detection equipment sold in California must be labeled or otherwise marked as “not compliant for use in California with USTs.” UST Owners/Operators must use appropriate leak detection equipment that is listed in the Local Guidance Letter 113 (LG113).

State Water Board letter regarding this issue - published May 29, 2015