Issue Date: November 22, 1995
Revision Date: November 14, 1997
Vaporless Manufacturing
Vaporless LD-2000, LD-2000S
Automatic Mechanical Line Leak Detector
| Certification | Leak rate of 3.0 gph with PD = 100% and PFA = 0%. |
|---|---|
| Leak Threshold | 1.7 gph. A pipeline system should not be declared tight if the test result indicates a loss that equals or exceeds this threshold. |
| Applicability | Gasoline, diesel, aviation fuel. Other liquids may be tested after consultation with the manufacturer. |
| Specification | System tests pressurized fiberglass or steel pipelines. Tests are conducted at operating pressure. |
| Pipeline Capacity | Maximum of 129 gallons. |
| Waiting Time | None between dispensing and testing. None between delivery and testing. |
| Test Period | Response time is 5 seconds. |
| System Features | Permanent installation on pipeline. Automatic testing of pipeline. Preset threshold. Single test to determine if pipeline is leaking. LD2000 - restricted flow to dispenser if leak is declared. LD2000S - pump shutoff if leak is declared. |
| Calibration | Equipment must be checked annually for capability of detecting a line leak of 3.0 gph and, if necessary, calibrated in accordance with manufacturer's instructions. |
- Vaporless Manufacturing
8700 East Long Mesa Drive
Prescott Valley, AZ 86314
Tel: (520) 775-0185 - Evaluator: Ken Wilcox Associates
Tel: (816) 443-2494
Dates of Evaluation: 11/19/90
Home | Vendors: A–F | Vendors: G–M | Vendors: N–S | Vendors: T–Z | Method Index
Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment. Equipment should be installed and operated in accordance with all applicable laws and regulations. For full details, please refer to our expanded DISCLAIMER page.
